- Per 1,000 sq ft
- Scrub and recovery of accessible floor area within the agreed work area. Pre-treat as needed.
- Industrial oils and grime; no traction certification; drying time depends on conditions.
Written Scope Sheet
Industrial Degreasing, Safety Marking, Production-Floor Cleaning
Technical facility support for warehouses and production areas that improves housekeeping standards, reduces workflow friction, and delivers documented results.
Core Services
- Per dock door
- Dock plate top surface if accessible. Degrease, agitation, extraction.
- Active traffic areas may require off-shift work or traffic control.
Written Scope Sheet
- Per machine
- Floor and accessible surfaces in work area. HEPA vacuum and sweep only. Excludes machine internals.
- No equipment operation or disassembly. External cleaning only; machine internals only if separately authorized.
Written Scope Sheet
- Per linear foot
- Accessible piping and racks up to 12 ft. HEPA vacuum only.
- Ladders only unless lift is scoped and approved. Work limited to agreed height.
Written Scope Sheet
- Per event or T&M
- Containment, absorption, recovery/extraction, and cleanup per written scope and site direction.
- No regulated waste transport/disposal; no remediation services.
Written Scope Sheet
- Per doorway or 100 sq ft
- Deep scrub of transition zones between shop and office, breakroom, or corridors. Transition zone only.
- Targets high-visibility track-out areas.
Written Scope Sheet
- Per linear foot, per sq ft, or per defined area
- Mechanical and chemical-assisted removal of cured hot melt adhesive from concrete, steel, and approved substrates. Softening, scraping, residue removal, and final surface wipe-down.
- Substrate must be structurally sound. No grinding unless specifically scoped. Adhesive type must be identified or test patch approved.
Written Scope Sheet
- Per zone, per line, or per sq ft
- Deep cleaning to support 3S or pre-5S initiatives. Removal of residue and debris from floors and accessible surfaces within the work area.
- This is a cleaning and condition-restoration service, not a process redesign or sustained 5S program. No equipment disassembly or machine internals unless separately authorized.
Written Scope Sheet
Safety Marking and Maintenance Coatings
- Per linear foot
- Solvent wipe prep, masking, re-application of industrial traffic paint. Colors per facility spec.
- Requires clean, dry substrate. Cure-time period required. No thermoplastic or epoxy systems unless subcontracted.
Written Scope Sheet
- Per unit
- Hand-clean, scuff-sand, industrial enamel for rails, bollards, guarding.
- No architectural painting. Rust-through or flaking paint may require a surface prep adder.
Written Scope Sheet
- Per stencil
- STOP, pedestrian crossing, dock numbers. One layout revision included.
- Same cure-time and substrate rules as line striping.
Written Scope Sheet
Value Add Facility Support
- Per station
- Inventory check, restocking, station cleaning.
- Consumables provided by client or billed as materials pass-through.
Written Scope Sheet
- Per mat or monthly
- Deep clean or rotation of industrial mats.
- Rubber or carpet industrial mats only.
Written Scope Sheet
- Per trip or load
- Collection from designated points to client dumpster or compactor.
- No off-site hauling unless separately contracted.
Written Scope Sheet
- Per zone or per event
- Focused cleaning ahead of audits, inspections, safety walks, or corporate visits. Targets high-visibility areas.
- Cleaning only. We do not run audits or certify results.
Written Scope Sheet
How Engagement Works
- Walkthrough: We review scope, access, schedule, restricted areas and no-spray areas, and take measurements for pricing.
- Scope Sheet (Pricing): You receive a written Scope Sheet with units, quantities, and pricing (lump sum or NTE, based on the PO).
- Execute: Work is performed on the agreed schedule, including after-hours and weekends when required.
- Closeout: After completion and signoff attempt, you receive a closeout packet with photos and checklist. Documentation is retained for 12 months unless contract terms require longer.
- Add-ons: Any work outside the Scope Sheet needs written approval (text or email) from the Authorized Contact before that work is performed.
Scope Control and Commercial Terms
- Scope Sheet: Work is sold by written Scope Sheet and priced lump sum or Not-To-Exceed (NTE) to match the PO. Unit rates apply to measured quantities.
- Change control: Add-ons require written authorization from the Authorized Contact before work starts.
- Minimum charge: $300 per visit.
- After-hours premium: +50% for work outside normal business hours or on weekends.
- Materials pass-through: Consumables (paint, stencils, vinyl) billed at cost + 15% unless otherwise quoted. Receipts available.
- Travel radius: Rates assume a 35-mile radius from Chattanooga. Beyond that: $2 per mile (or a quoted zone fee).
- Payment terms: Due upon completion for first-time customers. Net terms only by approved PO for established accounts.
Safety and Documentation
- OSHA-30 lead oversight for initial services and high-risk scopes such as overhead work and coatings.
- Site-specific JSA completed for each job and provided in the closeout packet.
- SDS informed chemical selection and facility approval of chemical and coating list when required.
- Restricted areas and no-spray areas are noted up front and followed on the job.
- Closeout packet delivered after completion and signoff attempt: signed scope checklist, JSA, chemical log when required, timestamped photos, and signoff record.
Client Site Requirements
- Water source and standard 110V power.
- Janitor sink or floor drain for recovery water disposal per facility direction.
- Equipment staging area and access path.
- Escort for security zones as required.
- Cure-time period and traffic exclusion for striping or coating scopes.
Operational Exclusions and Limitations
- No regulated waste transport or disposal.
- No confined space entry.
- No energized electrical cleaning and no work inside energized electrical cabinets.
- No compliance testing or audit services.
- No epoxy or thermoplastic floor systems unless subcontracted.
- Recovery water is disposed on-site per facility direction. No off-site liquid waste transport.